View PS9013-Y-AX_8827373.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

r08ds0136ej0100 rev.1.00 page 1 of 15 mar 11, 2016 data sheet ps9013 1 mbps, open collector output, high cmr, ipm driver, 5-pin ssop (lso5) photocoupler description the ps9013 is an optically coupled isolator containing a gaalas led on the input side and a photo diode and a signal processing circuit on the output side on one chip.the ps9013 is specified high cmr and pulse width distortion with operating temperature. it is suitable for ipm drive. features ? long creepage distance (8 mm min.) ? high common mode transient immunity (cm h , cm l = ? 50 kv/ ? s min.) ? operating ambient temperature (125 ? c max.) ? high-speed response (t phl = 500 ns max., t plh = 750 ns max.) ? maximum propagation delays (t plh ? t phl = 270 ns typ.) ? high isolation voltage (bv = 5 000 vr.m.s.) ? open collector output ? embossed tape product : ps9013-f3: 3 000 pcs/reel ? pb-free product ? safety standards ? ul approved: ul1577, double protection ? csa approved: ca5a, can/csa-c22.2 60065, can/csa-c22.2 60950-1, reinforced insulation) ? vde approval: din en 60747-5-5 (option) applications ? ipm driver ? general purpose inverter r08ds0136ej0100 rev.1.00 mar 11, 2016 start of mass production mar.2016 1. anode 2. cathode 3. gnd 4. v o 5. v cc pin connection (top view) 53 12 4
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 2 of 15 mar 11, 2016 package dimensions (unit: mm) weight 0.119g (typ.) photocoupler construction parameter min. air distance 8 mm outer creepage distance 8 mm isolation distance 0.15 mm
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 3 of 15 mar 11, 2016 block diagram marking example 5 4 3 1 2 led output on l off h shield 9013 9013
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 4 of 15 mar 11, 2016 ordering information part number order number solder plating specification packing style safety standard approval application part number *1 ps9013 PS9013-Y-AX pb-free and halogen free (ni/pd/au) 20 pcs (tape 20 pcs cut) standard products (ul,csa approved) ps9013 ps9013-f3 ps9013-y-f3-ax embossed tape 3 000 pcs/reel ps9013-v ps9013-y-v-ax 20 pcs (tape 20 pcs cut) ul,csa approved din en 60747-5-5 (vde 0884-5): 2011-11 approved (option) ps9013-v-f3 ps9013-y-v-f3-ax embossed tape 3 000 pcs/reel note: *1. for the application of the safety standard, following part number should be used. absolute maximum ratings (t a = 25 ? c, unless otherwise specified) parameter symbol ratings unit diode forward current *1 i f 25 ma reverse voltage v r 5 v detector supply voltage v cc ? 0.5 to +30 v output voltage v o ? 0.5 to +30 v output current i o 15 ma power dissipation *2 p c 250 mw isolation voltage *3 bv 5 000 vr.m.s. operating ambient temperature t a ? 40 to +125 ?c storage temperature t stg ? 55 to +150 ?c notes: *1. reduced to 0.325 ma/ ?c at t a = 85 ?c or more. *2. reduced to 4.15 mw/ ? c at t a = 85 ?c or more *3. ac voltage for 1 minute at t a = 25 ? c, rh = 60% between input and output. pins 1-3 shorted together, 4-6 shorted together. recommended operating conditions parameter symbol min. typ. max. unit supply voltage v cc 4.5 15 25 v forward current (on) i f (on) 8 12 ma forward voltage (off) v f (off) -2 0.8 v
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 5 of 15 mar 11, 2016 electrical characteristics (t a = ?40 to +125c, v cc = 15 v, unless otherwise specified) parameter symbol conditions min. typ. *1 max. unit diode forward voltage v f i f = 10 ma 1.35 1.56 1.75 v reverse current i r v r = 3 v 10 ? a terminal capacitance c t v = 0 v, f = 1 mhz, t a = 25 ? c 30 pf detector low level output voltage v ol i f = 10 ma, i ol = 2.4 ma 0.13 0.6 v high level output current i oh v cc = v o = 20 v, v f = 0.8 v 0.01 50 ? a high level supply current i cch v cc = 20 v, v f = 0.8 v, v o = open 1.0 1.3 ma low level supply current i ccl v cc = 20 v, i f = 10 ma, v o = open 1.0 1.3 ma coupled threshold input current (h ? l) i fhl v o = 0.8 v, i o = 0.75 ma 1.5 5.0 ma isolation resistance r i-o v i-o = 1 kv dc , rh = 40 to 60%, t a = 25 ? c 10 11 ? isolation capacitance c i-o v = 0 v, f = 1 mhz, ta = 25 ? c 0.7 pf propagation delay time (h ? l) *2 t phl i f = 10 ma, r l = 20 k ? , c l = 100 pf, v thhl = 1.5 v, v thlh = 2.0 v 250 500 ns propagation delay time (l ? h) *2 t plh 520 750 maximum propagation delays t plh ?t phl ? 200 270 650 pulse width distortion (pwd) *2 ? t phl -t plh ? 270 650 common mode transient immunity at high level output *3 c mh t a = 25 ? c, i f = 0 ma, v o > 3.0 v, v cm = 1.5 kv, rl = 20 k ? , c l = 100 pf 50 kv/ ? s common mode transient immunity at low level output *3 c ml t a = 25 ? c, i f = 10 ma, v o < 1.0 v, v cm = 1.5 kv, r l = 20 k ? , c l = 100 pf 50 kv/ ? s notes*: 1. typical values at t a = 25c. 2. test circuit for propagation delay time 3. test circui t for common mode transient immunity c l includes probe and stray wiring capacitance. pulse input (i f = 10 ma) 47 (pw = 10 s, duty cycle = 1/10) r l = 20 k v o (monitor) v cc = 15 v input (monitor) 0.1 f c l = 100 pf input output v thhl = 1.5 v v thlh = 2.0 v 15 v v ol t phl t plh i f (on) 50% i f (on) c l includes probe and stray wiring capacitance. 90% 10% 1.5 kv 0 v 15 v 3.0 v 1.0 v v ol v cm t r t f v o (switch a: i f = 0 ma) v o (switch b: i f = 10 ma) v o (monitor) r l = 20 k c l = 100 pf v cc = 15 v 0.1 f v cm sw i f ba
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 6 of 15 mar 11, 2016 typical characteristics (t a = 25 ? c, unless otherwise specified) remark the graphs indicate nominal characteristics. 30 25 20 15 10 5 0 150125100 75 50 25 0 maximum forward current vs. ambient temperature ambient temperature t a ( ) maximum forward current i f (ma) 300 250 200 150 100 50 0 150125100 75 50 25 0 detector power dissipation vs. ambient temperature ambient temperature t a ( ) detector power dissipation p c (mw) 2.00 1.75 1.25 1.00 0.75 0.50 0.00 150125 75 50 0 -25 -50 25 100 supply current vs. ambient temperature ambient temperature t a ( ) high level supply current i cch (ma) low level supply current i ccl (ma) 1.50 0.25 i cch i ccl v cc =20v v o =open i cch :v f =0.8v i ccl :i f =10ma 150125 75 50 0 -25 -50 25 100 5.0 4.0 3.0 2.0 1.0 0.0 threshold input current vs. ambient temperature ambient temperature t a ( ) threshold input current i fhl (ma) v cc =15v v o =0.8v i o =0.75ma 150125 75 50 0 -25-50 25 100 0.6 0.5 0.4 0.3 0.2 0.1 0.0 low level output voltage vs. ambient temperature ambient temperature t a ( ) low level output voltage v ol (v) vcc=15v if=10ma io=2.4ma
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 7 of 15 mar 11, 2016 typical characteristics (t a = 25 ? c, unless otherwise specified) remark the graphs indicate nominal characteristics. output current i o (ma) 20.0 10.0 5.0 0.0 15.0 16 14 12 8 6 2 0 output current vs. forward current forward current i f (ma) 10 4 v o =0.6v t a =40 t a =25 t a =125 2520 15 5 0 10 700 500 100 200 0 forward current i f (ma) 600 400 300 t plh |t phl \ t plh | t phl propagation delay time t phl , t plh (ns) maximum propagation delays |t phl -t plh |(ns) propagation delay time, maximum propagation delays vs. forward current vcc=15v cl=100pf rl=20k 30 20 0 10 2000 1400 200 600 0 supply voltage v cc (v) 1800 1200 800 propagation delay time t phl , t plh (ns) maximum propagation delays |t phl -t plh |(ns) propagation delay time, maximum propagation delays vs. supply voltage 1600 1000 400 t plh t phl |t phl \ t plh | if=10ma cl=100pf rl=20k 700 500 100 200 0 600 400 300 propagation delay time t phl , t plh (ns) pulse width distortion pwd (ns) propagation delay time, pulse width distortion vs. ambient temperature pwd 150 125 75 50 0 -25 -50 25 100 ambient temperature t a ( ) vcc=15v if=10ma cl=100pf rl=20k t plh t phl 500 300 0 200 2000 1400 200 600 0 load capacitance c l (pf) 1800 1200 800 propagation delay time t phl , t plh (ns) propagation delay time vs. load capacitance 1600 1000 400 100 400 t plh t phl if=10ma vcc=15v rl=20k 50 30 10 020 40 1200 1000 800 600 400 200 0 propagation delay time, maximum propagation delays vs. load resistance load resistance r l (k ? ) propagation delay time t phl , t plh (ns) maximum propagation delays |t phl -t plh |(ns) if=10ma vcc=15v cl=100pf t plh |t phl \ t plh | t phl
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 8 of 15 mar 11, 2016 typical characteristics (t a = 25 ? c, unless otherwise specified) remark the graphs indicate nominal characteristics. 25 15 5 010 20 600 500 400 300 200 100 0 propagation delay time, maximum propagation delays vs. load resistance load resistance r l (k ? ) propagation delay time t phl , t plh (ns) maximum propagation delays | t phl -t plh |(ns) if=10ma vcc=15v cl=15pf t plh |t phl \ t plh | t phl
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 9 of 15 mar 11, 2016 taping specifications (unit: mm) packing:3000 pcs/reel tape direction outline and dimensions ( r eel) outline and dimensions (taps)
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 10 of 15 mar 11, 2016 recommended mount pad dimensions (unit: mm) remark all dimensions in this figure must be evaluated before use.
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 11 of 15 mar 11, 2016 notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 ? c or below (package surface temperature) ? time of peak reflow temperature 10 seconds or less ? time of temperature higher than 220 ? c 60 seconds or less ? time to preheat temperature from 120 to 180 ? c 120 ? 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (2) wave soldering ? temperature 260 ? c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 ? c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron ? peak temperature (lead part temperature) 350 ? c or below ? time (each pins) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (4) cautions ? fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. cautions regarding noise be aware that when voltage is applied suddenly between the photocoupler?s input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 12030 s (preheating) 220c 180c package surface temperature t (c) time (s) recommended temperature profile of infrared reflow (heating) to 10 s to 60 s 260c max. 120c
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 12 of 15 mar 11, 2016 usage cautions 1. this product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. by-pass capacitor of more than 0.1 ? f is used between v cc and gnd near device. also , ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. avoid storage at a high temperature and high humidity.
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 13 of 15 mar 11, 2016 specification of vde marks license document parameter symbol spec. unit climatic test class (iec 60068- 1/din en 60068-1) 40/125/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, procedure a for type test and random test) u pr = 1.6 ? u iorm. , p d ? 5 pc u iorm u pr 1 130 1 808 v peak v peak test voltage (partial discharge test, procedure b for all devices) u pr = 1.875 ? u iorm. , p d ? 5 pc u pr 2 119 v peak highest permissible overvoltage u iotm 8 000 v peak degree of pollution (din en 60664-1 vde0110 part 1) 2 comparative tracking index (iec 60112/di n en 60112 (vde 0303 part 11)) cti 400 material group (din en 60664-1 vde0110 part 1) ii storage temperature range t stg ?55 to +150 c operating temperature range t a ?40 to +125 c isolation resistance, minimum value v io = 500 v dc at t a = 25c v io = 500 v dc at t a max. at least 100c ris min. ris min. 10 12 10 11 ? ? safety maximum ratings (maximum permiss ible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 175 400 700 10 9 c ma mw ?
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 14 of 15 mar 11, 2016
ps9013 chapter title r08ds0136ej0100 rev.1.00 page 15 of 15 mar 11, 2016 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposi ng of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subjec t to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth.
notice 1. descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics do es not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property right s of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any paten ts, copyrights or other intellectual property rights of renesas electronics or others. 4. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of renesas electronics product. 5. renesas electronics products are classified according to the following two quality grades: "standard" and "high quality". the recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti-crime systems; and safety equipment etc. renesas electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat t o human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). you must check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application for which it is not intended. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for which the product is not intended by renesas electronics. 6. you should use the renesas electronics products described in this document within the range specified by renesas electronics, e specially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas e lectronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 7. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have spec ific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatib ility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. you should not use renesas electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. when exporting the renesas electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. it is the responsibility of the buyer or distributor of renesas electronics products, who distributes, disposes of, or otherwis e places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, renesas electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of renesas electronics products. 11. this document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of renesas e lectronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this documen t or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-owned subs idiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. http://www.renesas.com refer to "http://www.renesas.com/" for the latest and detailed information. california eastern laboratories, inc. 4590 patrick henry drive, santa clara, california 95054-1817, u.s.a. tel: +1-408-919-2500, fax: +1-408-988-0279 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-585-100, fax: +44-1628-585-900 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-6503-0, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. room 1709, quantum plaza, no.27 zhichunlu haidian district, beijing 100191, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 301, tower a, central towers, 555 langao road, putuo district, shanghai, p. r. china 200333 tel: +86-21-2226-0888, fax: +86-21-2226-0999 renesas electronics hong kong limited unit 1601-1611, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2265-6688, fax: +852 2886-9022 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei 10543, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 80 bendemeer road, unit #06-02 hyflux innovation centre, singapore 339949 tel: +65-6213-0200, fax: +65-6213-0300 renesas electronics malaysia sdn.bhd. unit 1207, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: +60-3-7955-9390, fax: +60-3-7955-9510 renesas electronics india pvt. ltd. no.777c, 100 feet road, hal ii stage, indiranagar, bangalore, india tel: +91-80-67208700, fax: +91-80-67208777 renesas electronics korea co., ltd. 12f., 234 teheran-ro, gangnam-gu, seoul, 135-080, korea tel: +82-2-558-3737, fax: +82-2-558-5141 sales offices ? 2016 renesas electronics corporation. all rights reserved. colophon 5.0

▲Up To Search▲

Price & Availability of PS9013-Y-AX

	To Download PS9013-Y-AX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .